bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Nissan Titan XD


  • Everchill RV Mini Refrigerator Compressor Leaking Oil
  • The Everchill RV Mini Refrigerator w/ Freezer- 1.6 Cu Ft - 115V - Black Item # 324-000110 comes with a 1 year warranty from date of purchase. You might have an air leak on the compressor causing the oil. If the valve plate or a reed valve inside the compressor is damaged, it will cause the compressor to pump oil. If you don't find any air leaks, you probably need to remove the head and inspect the reed valves and valve plate for damage.
    view full answer...

  • Running Lights Not Working on 5th Wheel Towed by 2017 Nissan Titan XD
  • The first thing you'll want to do is determine if the problem lies with the vehicle or the trailer. Use a circuit tester like part # 40376 on the pin in the 11:00 position on the 7-way. If the vehicle headlights or running lights are on, this pin should show power. If it doesn't, the most likely cause would be a blown fuse or a missing relay. The engine compartment fuse box should have a description on the top or the inside of the lid describing which fuses protect which circuits. You'll...
    view full answer...

  • Troubleshooting Release Cable on Ranch Hitch Adapter
  • Have you measured to make sure the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3139 works with the hitch ball in your 2016 Nissan Titan XD? If not, what you need to do is line up your fifth wheel and Titan on level ground and measure from the bottom of the pin box to the top of the gooseneck ball. That measurement needs top be between 11-3/4" and 14-3/4" for the adapter to work with your truck. As for the release cable if nothing is happening when you attempt to use...
    view full answer...

  • How To Free Up Stuck Arms On The Roadmaster Falcon Tow Bars
  • There are a couple of options you can do to attempt to free up the arms on your Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522. What you can do is try and spray the arms with a degreaser, then move the arms in and out and rise with some water. After rinsing the arms, you are going to need to dry them thoroughly and spray a dry silicone on the arms. If that does not work, I recommend using the repair kit; the Roadmaster Repair Kit for Falcon Towbars # RM910003-52. This kit...
    view full answer...

  • Red Wire For Trailer Brake Controller Has Power Until Brake Pedal Is Pressed
  • I see you listed the 2018 Nissan Titan XD as your vehicle. If you are using a Tekonsha Brake Controller # 90195 it would use a Wiring Adapter # 3050-P which has a red, white, black and blue wire. The red wire carries power from the vehicle brake switch when the brake pedal is pressed. The white wire is the ground wire. The black wire is the main power wire and the blue is the output for power going to the trailer. If your red wire has power at all times except when the brake pedal is pressed...
    view full answer...

  • Troubleshooting Factory Brake Controller Error 0.9 on a 2016 Nissan Titan XD
  • That is an interesting dilemma; for the Prodigy P2, the 0.9 error is one that will flash a few times a second or steadily display. When this occurs it is because the controller recognizes that the trailer is connected but the P2 loses connection to the battery ground. First place to start is the connections. I would first check the trailer connector for any corrosion both inside and outside of the connector. Corrosion can cause all type of errors including the 0.9 you are getting. ...
    view full answer...

  • Troubleshooting Titan XD 6.5 bed Adapter Fit and Movement with Autoslide 5th Wheel Hitch
  • The Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package # DM6200 have 4 wear pads that are 1/2 inch thick and 8 thinner shims that are 1/4 inch each. I reached out to my contact at Demco and he said you may need to add or remove shims to get a tighter fit. The number of shims does not need to be equal but you should have a snug fit to the bed of your truck. When that adapter is snug the movement should be less significant but small movement is expected...
    view full answer...